WE SHIP OUR PRODUCTS WORLDWIDE!

HIGH QUALITY

CaTTLE HANDLING

equipment

Experience the unparalleled excellence of Bowman Chutes, your destination for premium cattle handling equipment. 

     QUALITY

 GUARANTEED

MODEL 2800 EXTENDED

FOR FARMERS, FEEDERS AND PRODUCERS

The Model 2800 Medium Duty series hydraulic chute is designed for the farmer, feeder or producer.The 3 1/2″O.D. bushings on the headgates and tailgates and the 3/16″ wall tubing on the frame makes this chute one of the best pieces of equipment for Cattlemen use.

Efficient Operation

The Model 2800 utilizes two hydraulic cylinders on the headgate and two on the tailgate, thus eliminating linkage arms and a lot of wear points. The headgate cylinders are slave cylinders that cause the two headgate doors to operate at the same moment, in time with each other.

Medium/Large Cattle Feeding Operations

Manufactured for medium/large cattle feeding operations, the expanded metal located on the upper part of the headgates allows the operator to synchronize procedures with the person on the other side of the chute… a very good safety factor.

Quiet Operation

The Model 2800 comes with the noise free vane pump and quiet power unit which maintains proper distance and alignment between the pump and the motor, utilizing a “C-faced flange.” The lower access doors are made up of heavy sheeting and removable, as in all of the hydraulic chutes.

Built to Last

The headgate also features rub strips at the top of the pipe, fabricated from a material known in the industry as “UHMW” plastic. This very durable material allows no wear to the head and tailgate pipes or the top of the tubing on the chute.

ADDITIONAL FEATURES

Being an industry leader, at Bowman Chutes, our extensive product line is meticulously designed with durability, safety, and practicality at the forefront of our minds.

Durability

The headgate also features rub strips at the top of the pipe, fabricated from a material known in the industry as “UHMW” plastic. This very durable material allows no wear to the head and tailgate pipes or the top of the tubing on the chute.




Heavy Bushing System

The Model 2800 hydraulic chute has 3 ½” OD x 3″ with a special insert made of VEKTON, located at the bottom of headgates and tailgates. The VEKTON inserts are 3″ OD with a 2″ hole and a metal insert with a 1″ bolt that holds the assembly together, making this bushing kit the heaviest in the marketplace today. All options available in the 3000 series are available on the 2800 series.

Stability

The center twister has a double impellar, one at each end, to assist in keeping the side panels from twisting. All points in the linkage of the impellar have replaceable bushings and are greaseable.





SPECIFICATIONS

SUPPORT ARENA

CONTACT NOW!

OUR EMAIL

bmichutes@gmail.com

Phone Number

402-721-7604

Address

111 South K St.
Fremont, NE 68025

SEND A MESSAGE